Bridgeport
In convallis – dolor turpis a feugiat facilisis. Morbi iaculis erat posuere, congue neque in, dapibus dui. Client: Seven Media Group Category: Product Design Date: June 2019 Sellus honcus ornare sapien, et laoreet nisi malesuada eu tempus dictum. Morbi eu rutrum risus, vel vulputate odio dictum purus vel condimentum. Proin condimentum congue tellus, sit amet…
Fadal
Fanuc produces a variety of different spindles for many applications and industries. They also produce an assortment of servo motors, which we also repair If you have a Servo motor down. Motor City Machine Tool has a lot of experience repairing Fanuc spindles and servo motors for all types of applications. We are more than…
We will be closed Monday 9/6/2021
In honor of Labor Day, C & M Precision Spindle will be closed on Monday, September 6, 2021.
C & M closed Monday 7/5/2021 for the 4th of July
C & M Precision Spindle will be closed Monday, July 5, 2021, in celebration of the holiday. We hope you have a fantastic 4th of July!
C & M closed for Memorial Day (5/31/2021)
C & M Precision Spindle will be closed Monday for Memorial Day. We wish you a happy and safe holiday!
Address Change for C & M Precision Spindle
PLEASE NOTE: As of 6/1/2021, our shipping and mailing addresses will be the same:
C & M Precision Spindle
19730 SW Cipole Rd
Ste 7
Tualatin, OR 97062
New C & M Precision Spindle Website up!
The NEW C & M Precision Spindle website is up! Please check it out at www.cm-spindle.com! We appreciate any feedback and let us know if there’s anything that you would like us to include. We’ll also be continually adding new features and content, including a detailed spindle reference library with case studies as well as…
Spindle me this
For the general spindle, the temperature should be 30 degrees over room temp when running full speed. Make sure you are measuring with a good temp gauge. If you can measure it, you can manage it, as the saying goes. No sounds like squealing or rumbling and especially no screeching. All those mean it’s gonna…
Happy and Prosperous New Year!
We are on the verge of new adventures with several custom design units being built and past custom units in for their first repair. Fadals have slowed down to a “me too” range. They were in here at 5 a week then our friend in Boise, Idaho CNC Pros started making them new and he…
We will be closed Monday 9/6/2021
In honor of Labor Day, C & M Precision Spindle will be closed on Monday, September 6, 2021.
C & M closed Monday 7/5/2021 for the 4th of July
C & M Precision Spindle will be closed Monday, July 5, 2021, in celebration of the holiday. We hope you have a fantastic 4th of July!
C & M closed for Memorial Day (5/31/2021)
C & M Precision Spindle will be closed Monday for Memorial Day. We wish you a happy and safe holiday!
Address Change for C & M Precision Spindle
PLEASE NOTE: As of 6/1/2021, our shipping and mailing addresses will be the same:
C & M Precision Spindle
19730 SW Cipole Rd
Ste 7
Tualatin, OR 97062
New C & M Precision Spindle Website up!
The NEW C & M Precision Spindle website is up! Please check it out at www.cm-spindle.com! We appreciate any feedback and let us know if there’s anything that you would like us to include. We’ll also be continually adding new features and content, including a detailed spindle reference library with case studies as well as…
Spindle me this
For the general spindle, the temperature should be 30 degrees over room temp when running full speed. Make sure you are measuring with a good temp gauge. If you can measure it, you can manage it, as the saying goes. No sounds like squealing or rumbling and especially no screeching. All those mean it’s gonna…
Happy and Prosperous New Year!
We are on the verge of new adventures with several custom design units being built and past custom units in for their first repair. Fadals have slowed down to a “me too” range. They were in here at 5 a week then our friend in Boise, Idaho CNC Pros started making them new and he…
